The AXILOG has an alarm output that is activated if a preset level is exceeded on one of the channels. The alarm responds immediately after a repetitive overload during the last 30 seconds. This precludes that every accidental overload triggers the alarm (this could be a door being slammed, somebody touching the sensor, etc.). Once activated the alarm will respond to each consecutive overload until the cause of the alarm is eliminated. The minimum alarm period can be set on the AXILOG.

The lamp is a very intense flashlight that can be seen very well, even in bright sunlight.

The lamp is powered with regular penlight batteries. Alkaline type batteries will keep the lamp flashing for 8 hours continuously. Under normal circumstances, the lamp should not light at all.

The lamp has a test button that can be used to test the operation before use.

The AXILOG activates the alarm output when the logging is started and when it is stopped so that the lamp can be checked.

The alarm lamp is designed for outdoor use. It has 5 meter of cable. The cable can be extended with the extension cord that is available as an option.