An AXILOG sensor contains 3 geophones that measure the particle velocity in X-, Y-, and Z-direction. The sensors have a high nominal sensitivity. The geophones are watertight. The housing has a spirit level that can be used to mount it horizontally. The sensor can be mounted on the wall or placed on the floor or ground.

The sensor has a cable of 4 metres. The cable has a polyurethane jacket that will last for many years in the field. The cable is only 6 mm in diameter and easy to handle.

Each AXILOG is delivered with a calibration certificate. The calibration is traceable to national standards. The AXILOG system must be calibrated regularly, yearly if used regularly, and it is recommended to calibrate the system after severe overload of the sensor, for example when it has been dropped hard on a hard surface.

There are two different types of sensors for the AXILOG. The sensors have a different characteristic, especially at very low frequencies. The AXILOG and sensor are calibrated together. It is possible to change the sensor afterwards. The system is recalibrated then.

Below some examples of the calibration sheets of the Axilog sensor and Axilog system.