PIB-A
PRO-NET Home Products Contact

Overview
Datasheets
Download

Description

This board has 7 analogue inputs. Each of the inputs can be programmed for an input range of 10mV, 40mV, 200mV or 2V full scale. The inputs are bipolar, both positive and negative voltages can be measured. The inputs have a common ground.

Each of the channels is calibrated individually. The accuracy is 0.1%. The zero drift is compensated electronically and is neglectable over the temperature range.

The input signal is digitized with an integrating A-D converter. 50Hz noise is practically completely filtered. Pulse shaped noise on the input gives an error in the reading that is determined by the energy content of the pulse, not the amplitude. This results in very stable readings.

Each channel has a jumper that places a resistor of 100 Ohm 0.1%, parallel to the input terminals. This is used for 0...20mA or 4...20mA signals.

Specifications

width

4 TE

power supply

+/-15Vdc,  < 10mA

input type

bipolar, single ended, common ground

input range

10mV, 40mV, 200mV, 2V full scale

input impedance

200 kOhm (100 Ohm)

jumpers

input resistance, board address

initial error

0.1% max.

temperature range operating

-10...+50°C

temperature range storage

-20...+70°C

temperature drift range

< 25 ppm / °C 

temperature drift zero

< 0.05% of full scale

resolution

20.000 counts (0.5µV, 2µV, 10µV, 100µV)

A/D converter

integrating, integration period 20ms

Connections

pin

signal

jumper settings

1

0V

2

0V

3

+ channel 7

4

0V (- channel 7)

5

+ channel 6

6

0V (- channel 6)

7

+ channel 5

8

0V (- channel 5)

option jumpers

9

+ channel 4

10

0V (- channel 4)

11

+ channel 3

12

0V (- channel 3)

13

+ channel 2

14

0V (- channel 2)

15

+ channel 1

16

0V (- channel 1)

 

Please contact us if you have any questions or remarks about this website.
e-mail to webmaster@LeiderdorpInstruments.nl  
Copyright © 1999 - 2004  Leiderdorp Instruments
Last modified on: 23-11-2006